Quick answer
Contractor math tests and licensing exams use the same handful of formulas: area (length x width), volume in cubic yards (cubic feet / 27), square yards (square feet / 9), markup vs. margin, labor burden and overhead per hour. Practice them here with step-by-step answers.
Practice only. Not an official test.
These are original practice questions written by PITHE Digital Group for study purposes, based on public laws, codes and agency guidance. They are not real or past exam questions, and this page is not affiliated with, endorsed by or sponsored by any licensing board or testing company or any testing company. A score here does not predict your real exam result and does not give you any license, permit, card or certificate.
Laws, codes and fees change, and mistakes are possible. Always confirm with the official agency and your approved course materials. This is general educational information, not legal or professional advice. Read the full disclaimer.
Exam facts are from public agency sources as of November 7, 2026. Confirm current details with the official agency before you schedule.
Bad math loses money on every job. Get fast at these and your bids and exams both improve.
How it works: tap an answer to see if you got it right, why, and the law or code it comes from. Your progress saves on this device only, so you can bookmark the page and pick up later. No signup, no card.
Jump to: Area and volume · Lengths, slopes and pitch · Money math
Area and volume
Practice question 1 · Area and volume
A wall is 14 feet long and 8 feet high. How many square feet?
Answer: B. 112 14 x 8 = 112 square feet.Source: Construction math
Practice question 2 · Area and volume
A room is 18 by 12 feet. How many square yards of carpet (no waste)?
Answer: B. 24 18 x 12 = 216 square feet. Divide by 9 = 24 square yards.Source: Construction math (9 square feet = 1 square yard)
Practice question 3 · Area and volume
A slab is 30 feet by 20 feet and 6 inches thick. About how many cubic yards of concrete?
Answer: C. 11.1 30 x 20 x 0.5 = 300 cubic feet. 300 / 27 = about 11.1 cubic yards.Source: Construction math (27 cubic feet = 1 cubic yard)
Practice question 4 · Area and volume
A circular patio has a 10-foot radius. About how many square feet?
Answer: B. 314 Area = pi x r squared = 3.14 x 100 = about 314 square feet.Source: Geometry
Practice question 5 · Area and volume
A triangular gable end is 24 feet wide at the base and 8 feet tall. What is its area?
Answer: B. 96 square feet Triangle area = 1/2 x base x height = 0.5 x 24 x 8 = 96 square feet.Source: Geometry
Practice question 6 · Area and volume
A gallon of paint covers about 350 square feet. How many gallons for 1,200 square feet with two coats?
Answer: D. 7 (about 6.9, round up) 1,200 x 2 = 2,400 square feet. 2,400 / 350 = 6.9, so buy 7 gallons.Source: Construction math
Practice question 7 · Area and volume
How many 4 by 8 sheets of drywall are needed to cover 1,000 square feet (no waste)?
Answer: B. 32 (31.25, round up) Each sheet is 32 square feet. 1,000 / 32 = 31.25, so 32 sheets, plus waste in real life.Source: Construction math
Lengths, slopes and pitch
Practice question 8 · Lengths, slopes and pitch
A roof rises 6 inches for every 12 inches of run. What is the pitch?
Answer: A. 6 in 12 Pitch is written as rise per 12 inches of run: 6 in 12. (It is also a 50% slope.)Source: Construction math
Practice question 9 · Lengths, slopes and pitch
A right triangle has legs of 3 feet and 4 feet. How long is the diagonal?
Answer: C. 5 feet 3 squared + 4 squared = 25. The square root is 5. This is the 3-4-5 rule for squaring corners.Source: Pythagorean theorem
Practice question 10 · Lengths, slopes and pitch
How many inches are in 7.5 feet?
Answer: C. 90 7.5 x 12 = 90 inches.Source: Unit conversion
Practice question 11 · Lengths, slopes and pitch
A fence is 120 feet long with posts every 8 feet, including both ends. How many posts?
Answer: B. 16 120 / 8 = 15 spaces, plus 1 = 16 posts.Source: Construction math
Practice question 12 · Lengths, slopes and pitch
A drain pipe runs 60 feet at 1/4 inch per foot. How much total fall?
Answer: A. 15 inches 60 x 0.25 = 15 inches.Source: Construction math
Money math
Practice question 13 · Money math
Materials cost $2,400 and labor is $1,800. You add 20% markup. What is the price?
Answer: B. $5,040 $2,400 + $1,800 = $4,200. $4,200 x 1.20 = $5,040.Source: Estimating math
Practice question 14 · Money math
You want a 30% gross margin on a job that costs $7,000. What price?
Answer: A. $10,000 Price = cost / (1 - 0.30) = $7,000 / 0.70 = $10,000.Source: Estimating math
Practice question 15 · Money math
A 25% markup equals what gross margin?
Answer: A. 20% On $100 cost, a 25% markup gives $125. Profit $25 / price $125 = 20%.Source: Estimating math
Practice question 16 · Money math
A worker earns $30 an hour and labor burden is 30%. What is the true hourly cost?
Answer: A. $39 $30 x 1.30 = $39 per hour.Source: Estimating math
Practice question 17 · Money math
Your overhead is $8,000 a month and you bill 160 labor hours a month. How much overhead should each billable hour cover?
Answer: A. $50 $8,000 / 160 = $50 per billable hour, before profit.Source: Estimating math
Practice question 18 · Money math
A $20,000 contract requires a 10% retainage. How much is held back?
Answer: A. $2,000 $20,000 x 0.10 = $2,000.Source: Construction contracting math
Practice score only. This is not an official result and does not predict how you will do on the real exam.
Ready to bid with confidence? Try the job price calculator.
How to pass: study tips that work
- Write out units at every step.
- Always round materials up.
- Practice markup vs. margin until it is second nature.
Official sources to study from
Use the official materials and approved courses as your real guide. These links go to the agencies, not to us.
See a mistake or an outdated rule? Tell us and we will check it against the official source and fix it.
More free practice tests
Common questions
What math is on contractor exams?
Area, volume, unit conversions, percentages, markup, margin, payroll and basic financial ratios.
Are these real Contractor math exam questions?
No. They are original practice questions written by PITHE Digital Group from public laws, codes and agency guidance. They are not real or past exam questions, and we are not affiliated with any licensing board or testing company or any testing company.
Does passing this Contractor math practice test give me a license or certificate?
No. This free practice test is for study only. You must complete the official requirements and pass the official exam through the agency or its approved provider.
Is this practice test free?
Yes. It is free with no signup. Your progress saves only on your device.
Save this page. Bookmark it (on iPhone tap Share, then Add Bookmark) or send it to someone starting out.
Want customers to find you, too?
List your business free, or get a free website mockup and a written quote from our Pacific Northwest team.